- This topic has 125 replies, 37 voices, and was last updated 5 years, 5 months ago by
.
-
Posts
-
I bought a HDR 2000T a couple of days ago and twice already I have had no sound output from it – in each case switching it to standby and back on had no effect.
The first time I unplugged the power and plugged it back in – at that point the sound was back, but then after a few hours it was silent again.
I did a factory reset, and again the sound was back – at the moment it is still working, but can anyone suggest why there was no sound at all? If it happens again I’ll have to take this back to the shop I think because presumably it’s a fault.
What is processing the sound and how is it connected. HDMI?
Was the channel being watched a HD channel?
It was connected with HDMI, and it didn’t matter if it was on HD channels or SD – when there was no sound it didn’t make any difference.
Sorry I should also have said the sound was being processed by a Sony Bravia television
I am having the same problem, i only bought My humax HDR 2000t last week from argos. it was working fine until 2 days ago i put it on mute for a while and when i came back to it the sound wouldnt work i tried to play stuff that i had recorded , the film played but again no sound. eventually i turned all switches off at the wall for a few minutes and when i turned it back on the sound was working again!
The same thing happened again last night and agin i switched all off at wall and switched on again and the sound was back.
is there a fault? i am going to try a different HDMI lead as you suggest tonight and maybe i should default to factory settings. very frustrated as my father has a 9300t humax and thats why i bought Humax
Hi
Did you get this ‘no sound ‘ issue resolved?? Or did you return humax ?
I have same ‘no sound’ problem when I turn put my tv (sharp aquos led) in to standby / then back on again. Only way to fix is to power-recycle the humax hdr-2000T
(however I don’t have problems when connected to my sony bravia tv)
I have the same problem, but mine is connected through HDMI to a Sony Bravia TV. I have tried all the suggestions and a new cable, but the only way to get it back on is to power cycle the HDR2000T.
Has anyone got a fix for this issue, or is the only option to send it back?
Have just spoken to Humax Technical support.
The technical support chap said my sound problems were to do with my sharp TV … they said there are no problems with the HDR-2000T
Looks like im on my own.
Humax are offering no help. The box is not compatible with some tvs (humax refuse to acknowledge this)
Thats odd as i have a Sony Bravia and its doing exactly the same thing
Tune the PVR to a SD channel. Try both volume controls for the TV and for the PVR – look on screen for any mute indication from either.
Volume controls go up and down but there is no sound, until you reboot the box
I agree with mark
The only way to fix is to reboot the hdr-2000t
I have checked every obvious audio setting on both the TV and humax … nothing fixes it
as well as problems encountered when powering tv off/on ….. I have also had no sound if I power the humax on before I power tv on
I believe it is some sort of HDMI mis-match?? but not sure
Do I have a faulty hdr-2000t ??… probably not. Its probably a software bug. It would have been nice if humax had acknowledged my reported issue, instead of dismissing it out of hand (and blaming the tv).
PS – my hdr-2000t arrived direct from humax … covered in finger prints. Strange?? Couldn’t be a faulty return as it was the just arrived 1TB model?
Hi,
I have the same problem. On mine it happens when the humax hdr-2000t is on but I’ve turned my TV onto a different input source (like a DVD player) or I’ve turned the humax on before the TV. My TV is a Philips 32PFL5322 and I’m using an HDMI connection.
I can get the sound back by doing a cold reset but this isn’t possible while it’s recording.
Changing volume / mute functions on both TV and humax makes no difference when the sound has gone.
I think this issue has occurred on the HDR fox t2 as well which is what the hdr-2000t pretty much is:
http://www.avforums.com/threads/humax-hdr-fox-t2-no-sound.1404313/
I have emailed Humax – maybe this is more common than they realise?
I am connecting to a Sharp Aquos TV and have exactly the same issue.
Humax support have recommended a reset to Factory Default.
- You must be logged in to reply to this topic.