Resolution 2160p

Forum Forums Freeview HD FVP 4000T, 5000T Resolution 2160p

Viewing 15 posts - 1 through 15 (of 39 total)
  • Author
    Posts
  • #18145
    Anonymous
    Inactive

    I’m using the 4000t connected to a 48″ 4K Samsung TV via HDMI slot one.

    All the resolutions on the Humax menu work as expected except the 2160p setting. When I use this, my TV says that the Humax output is 720 / 576 50p (exactly the same as the 576p resolution menu choice).

    I understood that 2160p is the correct setting for use with a 4K TV. Am I doing something wrong or is this another Humax “feature” ?

    Thanks.

    #71960
    Anonymous
    Inactive

    I’ve got exactly the same problem on my 49″ Samsung. The 2160p resolution did work up until the last two software updates on the Humax. I have had a series of email communications with Humax,and the conclusion was they will look into a fix on the next update. Really annoying that it did work before!

    #71961
    grahamlthompson
    Participant

    giverny – 4 hours ago  » 

    I’m using the 4000t connected to a 48″ 4K Samsung TV via HDMI slot one.

    All the resolutions on the Humax menu work as expected except the 2160p setting. When I use this, my TV says that the Humax output is 720 / 576 50p (exactly the same as the 576p resolution menu choice).

    I understood that 2160p is the correct setting for use with a 4K TV. Am I doing something wrong or is this another Humax “feature” ?

    Thanks.

    Your TV will always display a 2160p picture whatever input resolution you input via HDMI. If the input signal has a lower vertical resolution than 2160 pixels it will re-scale the picture to create the extra pixels (Basically invent the missing pixels in a intelligent way). If it did not you would have a tiny picture in the middle of the screen. If the Humax now lacks the 2160p upscaling output, it’s unlikely to make no difference at all. Only in the very unlikely event that the Humax upscales to 2160p better than your TV does would it produce a superior picture.

    Basically if your Humax is set to output 1080p it will output Freeview-HD content at 1080p25 as is leaving the TV to complete the scaling required to fill the display screen. If you are watching a SD channel (the best ones are 720 x 576 interlaced), with the box set to 1080p the box upscales 720 x 576 to 1920 x 1080 and de-interlaces to progressive. The TV then upscales to UHD as it did for HD sources.

    Set your box to output 576i (original for SD sources), the TV handles the whole re-scaling and de-interlacing process.

    Only if you have a UHD source will it make any significant difference.

    Does the 4000T Netflix app give you access to any streamed UHD content ?

    #71962
    Anonymous
    Inactive

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    #71963
    Anonymous
    Inactive

    Yes very annoying Humax seem to care very little about removing semi working features and then to add insult to injury they think it is OK to not tell their customers. This is the second feature they have removed without a word of as to why. The first was CEC pass through. I have seen on here somewhere that the EPG is not written in house they have used a third party to do it. Not a bright idea at the best of times.

    #71964
    grahamlthompson
    Participant

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    #71965
    Anonymous
    Inactive

    grahamlthompson – 1 hour ago  » 

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    If you look at the menu video resolution options, you can see for yourself all the supposed resolution capabilities.

    #71966
    grahamlthompson
    Participant

    giverny – 1 hour ago  » 

    grahamlthompson – 1 hour ago  » 

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    If you look at the menu video resolution options, you can see for yourself all the supposed resolution capabilities.

    I don’t have the box to look at, only the advertised specs. Question did using the 2160p output improve the picture on your UHD TV compared to using the 1080p output ?

    #71967
    Anonymous
    Inactive

    grahamlthompson – 39 minutes ago  » 

    giverny – 1 hour ago  » 

    grahamlthompson – 1 hour ago  » 

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    If you look at the menu video resolution options, you can see for yourself all the supposed resolution capabilities.

    I don’t have the box to look at, only the advertised specs. Question did using the 2160p output improve the picture on your UHD TV compared to using the 1080p output ?

    If I may answer,it is a yes to your question. The 1080p resolution is very good,but the 2160p was a joy to watch,until Humax screwed it up with a software update.

    #71968
    grahamlthompson
    Participant

    bampsam – 1 hour ago  » 

    grahamlthompson – 39 minutes ago  » 

    giverny – 1 hour ago  » 

    grahamlthompson – 1 hour ago  » 

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    If you look at the menu video resolution options, you can see for yourself all the supposed resolution capabilities.

    I don’t have the box to look at, only the advertised specs. Question did using the 2160p output improve the picture on your UHD TV compared to using the 1080p output ?

    If I may answer,it is a yes to your question. The 1080p resolution is very good,but the 2160p was a joy to watch,until Humax screwed it up with a software update.

    What make and model is the TV. Very surprised a relatively cheap set top box has a superior scaler to a UHD TV (unless of course it’s a supermarket vestel special).

    #71969
    Anonymous
    Inactive

    grahamlthompson – 3 minutes ago  » 

    bampsam – 1 hour ago  » 

    grahamlthompson – 39 minutes ago  » 

    giverny – 1 hour ago  » 

    grahamlthompson – 1 hour ago  » 

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    If you look at the menu video resolution options, you can see for yourself all the supposed resolution capabilities.

    I don’t have the box to look at, only the advertised specs. Question did using the 2160p output improve the picture on your UHD TV compared to using the 1080p output ?

    If I may answer,it is a yes to your question. The 1080p resolution is very good,but the 2160p was a joy to watch,until Humax screwed it up with a software update.

    What make and model is the TV. Very surprised a relatively cheap set top box has a superior scaler to a UHD TV (unless of course it’s a supermarket vestel special).

    Samsung 49KS8000,and certainly wasn’t cheap!

    #71970
    grahamlthompson
    Participant

    bampsam – 4 minutes ago  » 

    grahamlthompson – 3 minutes ago  » 

    bampsam – 1 hour ago  » 

    grahamlthompson – 39 minutes ago  » 

    giverny – 1 hour ago  » 

    grahamlthompson – 1 hour ago  » 

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    If you look at the menu video resolution options, you can see for yourself all the supposed resolution capabilities.

    I don’t have the box to look at, only the advertised specs. Question did using the 2160p output improve the picture on your UHD TV compared to using the 1080p output ?

    If I may answer,it is a yes to your question. The 1080p resolution is very good,but the 2160p was a joy to watch,until Humax screwed it up with a software update.

    What make and model is the TV. Very surprised a relatively cheap set top box has a superior scaler to a UHD TV (unless of course it’s a supermarket vestel special).

    Samsung 49KS8000,and certainly wasn’t cheap!

    Don’t you think a quality TV should outperform an external box ?

    #71971
    Anonymous
    Inactive

    grahamlthompson – 1 minute ago  » 

    bampsam – 4 minutes ago  » 

    grahamlthompson – 3 minutes ago  » 

    bampsam – 1 hour ago  » 

    grahamlthompson – 39 minutes ago  » 

    giverny – 1 hour ago  » 

    grahamlthompson – 1 hour ago  » 

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    If you look at the menu video resolution options, you can see for yourself all the supposed resolution capabilities.

    I don’t have the box to look at, only the advertised specs. Question did using the 2160p output improve the picture on your UHD TV compared to using the 1080p output ?

    If I may answer,it is a yes to your question. The 1080p resolution is very good,but the 2160p was a joy to watch,until Humax screwed it up with a software update.

    What make and model is the TV. Very surprised a relatively cheap set top box has a superior scaler to a UHD TV (unless of course it’s a supermarket vestel special).

    Samsung 49KS8000,and certainly wasn’t cheap!

    Don’t you think a quality TV should outperform an external box ?

    I would have thought so,but can only state what I experienced when viewing whilst the Humax was set to 2160p. I get the feeling you’re doubting my posts.

    #71972
    grahamlthompson
    Participant

    bampsam – 22 minutes ago  » 

    grahamlthompson – 1 minute ago  » 

    bampsam – 4 minutes ago  » 

    grahamlthompson – 3 minutes ago  » 

    bampsam – 1 hour ago  » 

    grahamlthompson – 39 minutes ago  » 

    giverny – 1 hour ago  » 

    grahamlthompson – 1 hour ago  » 

    giverny – 12 hours ago  » 

    Very interesting and I already know that my TV upscales but my question was why is the Humax not doing what it is supposed to do.

    Does it actually say anywhere it is UHD capable ?

    If you look at the menu video resolution options, you can see for yourself all the supposed resolution capabilities.

    I don’t have the box to look at, only the advertised specs. Question did using the 2160p output improve the picture on your UHD TV compared to using the 1080p output ?

    If I may answer,it is a yes to your question. The 1080p resolution is very good,but the 2160p was a joy to watch,until Humax screwed it up with a software update.

    What make and model is the TV. Very surprised a relatively cheap set top box has a superior scaler to a UHD TV (unless of course it’s a supermarket vestel special).

    Samsung 49KS8000,and certainly wasn’t cheap!

    Don’t you think a quality TV should outperform an external box ?

    I would have thought so,but can only state what I experienced when viewing whilst the Humax was set to 2160p. I get the feeling you’re doubting my posts.

    Not at all. I don’t have a 4K TV but my Panasonic TV scales equally as well as all my other kit from SD to HD and de-interlaces equally on those that have progressive output. I have always thought blu-ray players with UHD upscaling were a bit of a gimmick. General experience is that a TV works just as well if not better, and you don’t have to transmit extra data over the hdmi cable.

    I hope Humax restore your missing 2160p :-)

    #71973
    Barry
    Moderator

    Have reported this issue to Humax Towers.

    More when I have it.

    Edit@ 16:30 – Acknowledged by Humax Towers and passed onto engineering/development team for investigation.

Viewing 15 posts - 1 through 15 (of 39 total)
  • You must be logged in to reply to this topic.

The inner genius!