New software version 1.01.11

Forum Forums Freeview HD FVP 4000T, 5000T New software version 1.01.11

Viewing 15 posts - 46 through 60 (of 132 total)
  • Author
    Posts
  • #70940
    Anonymous
    Inactive

    Barry – 3 days ago  » 

    Available from Humax Support site:

    http://www.humaxdigital.com/uk/products/product_releases.php?gid=613&pid=6

    Release note:

    • Netflix App Launched (Will be available from 20th)

    • Improved Wi-Fi Connectivity

    • Improved Home UI

    • Improved EPG Performance

    • Improved No Booting Up Issue

    Does not appear to be available via IP or OTA at this time.

    Edit: IP download is being phased, it will be available again 13/05 for the next tranche.

    #70941
    Anonymous
    Inactive

    had the update yesterday but no Netflix, so are they adding Netflix after the 20th of may, I thought it all updated together, can you help please 🙄

    #70942
    Anonymous
    Inactive

    Promethian – 49 minutes ago  » 

    Hi,

    I was considering buying a FVP 4000t but was put off by the reports of poor software.

    How much better has this firmware update made the operating system?

    Are ‘you’ expecting further updates that tackle the other problem area’s? such as blank thumbnails, no list view available for recorded programs etc etc.

    Thanks in advance :)

    I was more than happy with the original software but the new update has improved things further & no doubt there will be more to follow.

    Many of the things people moaned about in reviews in my opinion were just because they were different than what they were used to. Once you get used to the EPG etc it`s a great bit of kit IMO

    I`m looking forward to the immanent Netfix addition. By the way can anyone confirm if Discovery Channel & Nat Geographic Channel programmes such as Wheeler Dealers & Car SOS are on there?

    #70943
    Barry
    Moderator

    carl1877 – 37 minutes ago  » 

    had the update yesterday but no Netflix, so are they adding Netflix after the 20th of may, I thought it all updated together, can you help please 🙄

    As per the release note, should re appear in on demand section under Humax Apps on 20th May.

    #70944
    Barry
    Moderator
    Quote:
    I`m looking forward to the immanent Netfix addition. By the way can anyone confirm if Discovery Channel & Nat Geographic Channel programmes such as Wheeler Dealers & Car SOS are on there?

    Search does not find either programme I’m afraid.

    #70945
    Anonymous
    Inactive

    Barry – 11 minutes ago  » 

    Quote:
    I`m looking forward to the immanent Netfix addition. By the way can anyone confirm if Discovery Channel & Nat Geographic Channel programmes such as Wheeler Dealers & Car SOS are on there?

    Search does not find either programme I’m afraid.</blockquote>

    Oh well i`ll have to make do with Youtube for those then. Cheers Barry.

    #70946
    Anonymous
    Inactive

    So, I made sure that disc activity had ceased then turned off at the mains for ten minutes. Turning back on and the recordings had returned. However, I have duplicates of some of the recordings (it looks like any one off recordings are duplicated).

    Also a new Wi-Fi bug. The status checker says everything is okay but when I press the On Demand button I get the screen telling me to connect to the internet.

    I’m copying off any essential recording and then I’m going to format and do a factory default.

    #70947
    Anonymous
    Inactive

    New poster here. Update happened sometime yesterday and seemed to cause wifi to be forgotten for a while, then passcodes etc were not recognised. On switching on this morning, all on demand services (iplayer etc) were missing as options and seeminging unobtainable. The on demand button on the remote was effectively useless. Only by switching off at the mains and unplugging for a few minutes did they come back.

    #70948
    Anonymous
    Inactive

    Oh – and I should have added that the wifi managed to reconnect satisfactorily today without needing to re-enter the passcode, and so happily that bug was only temporary. Annoying though.

    #70949
    Anonymous
    Inactive

    Luddite – 2 hours ago  » 

    Oh – and I should have added that the wifi managed to reconnect satisfactorily today without needing to re-enter the passcode, and so happily that bug was only temporary. Annoying though.

    After doing a factory default and reformat. All but the Wi-Fi was working. Exactly the same issue as you. I’m hoping that leaving it alone for a while that it will come back like yours did!

    (Tested with an EE Brightbox and a Huawei 4g router)

    #70950
    Anonymous
    Inactive

    Any help would be appreciated. I recently purchased a 4K UHD TV to which I connected my FVP-4000T,and was immediately disappointed with the picture quality compared to the five year old tv it replaced. Tried all manner of picture settings on the tv to no avail. Then I tried the 2160P resolution on the Humax,and the improvement was immediate and basically amazing. Could not wish for better. Then I updated to the latest software and now when I choose 2160P,it’s no better than 576i. Any ideas or help please.

    #70951
    Anonymous
    Inactive

    Well, after coming back to it this morning, the Wi-Fi is now working without me re-entering the password. Just as happened with Luddite.

    I have to say that was not a smooth process. And I would echo the annoying comment made by Luddite. I would strongly suggest that more thorough beta testing takes place before the next update.After all, this may be happening to non-techie users who will think their boxes are broken.

    (This is not a slight at those generous forum members who gave their time to the trial, as you wouldn’t have tested the automatic overnight update process.)

    #70952
    Anonymous
    Inactive

    Software update seems ok. However, when I power up, the red light appears, then goes off. The Humax splash appears when the blue light appears, but takes a time for signal to come through. Has this been covered in software update forum?

    #70953
    Barry
    Moderator

    bambi1942 – 50 minutes ago  » 

    Software update seems ok. However, when I power up, the red light appears, then goes off. The Humax splash appears when the blue light appears, but takes a time for signal to come through. Has this been covered in software update forum?

    What loader version is uploaded to your unit?

    Settings

    System Settings

    System Information

    #70954
    Anonymous
    Inactive

    So last night the box kept on rebooting every 5 – 10 minutes. not sure if related to the upgrade or that the box has a fundamental dislike of the Eurovision song contest…. will see how it goes tonight. Just in case I need it tomorrow, what’s the best number to call humax on?

Viewing 15 posts - 46 through 60 (of 132 total)
  • You must be logged in to reply to this topic.

The inner genius!