No Recordings..again.

[Anonymous]

This link shows the MUX for Saorview http://touch.boards.ie/thread/2056427289.

I watch and record Saorview and Freeview on my Humax HDR T2. To set up I used a manual scan scanning the Freeview MUXs’ first ( in my case LCN 49, 50, 54, 58, 59 and then for free view T2 55. )

Manual tuning menu]settings]installation] pin Manual Search and when on Channel 55 I change the ‘Transmission’ setting from DVB-T to }DVB-T2.

I then scan the saorview muxes (in my case MUX 42 and MUX 45) but change the ‘Transmission’ setting back to DVB-T. This sets up the saorview channels in the 800’s. Some of the unknown channels are not yet used so I delete them. menu}settings}Edit Channels}Edit Channel List.

For recording from BOTH Saor and Free view the recordings MUST be padded. menu}settings}preferences}recording}start padding time 1 Mins

menu}settings}preferences}recording}end padding time 2 Mins.

This example will start recordings automatically 1 minute before the scheduled EPG start and end 2 minutes after the EPG scheduled end.

If the default 0mins for a freeview recording the HDR will scan the signal to indicate that that freeview programming is starting (however if you are watching Saorview that freeview start is never signaled).

If the box is not used on a daily basis for freevie2 and saorview you may find the schedule and series links are skipped or don’t update.

[Anonymous]

You can set a daily timer or a reminder to get the EPG topped up every day for padding.

[Author]

Posts