- This topic has 30 replies, 10 voices, and was last updated 3 years, 10 months ago by
.
-
Posts
-
i think you may be right Martin
Martin Liddle – 2 days ago »
Gem – 1 day ago »
trying each loader.. but still getting the issues.
Does anyone think installing an earlier old software version might help? or would that just make it worse or no difference?
im so fed up
Sorry that didn’t help but in my first post in this thread I did say the symptoms you were reporting suggested a hardware failure. In my view it is time for you to give up.
so I bought a Humax HDR 2000-T and what the hell is with the noise?!
there is a constant whirring noise coming from it, like the sound a hard drive makes when it starts up. But it’s all the time, very loud and very annoying. I’ve never had this problem. My mum has this model and hers doesn’t do this.
It also doesn’t matter how loud I have the TV it’s still audible.
Anyone had this issue?
The company say they will collect it and test it etc after I provided a video of the sound.. but then ill be without one for a while as I gave my other away!
why can’t anything just work properly!
seems to have calmed down a bit now.. ignore me!
This may be an old topic, but the problems still exist. I acquired two recent 50/43 inch TVs, a Panasonic and a Sony – NOT 4k. Both exhibit the same features – full green screen from HDMI on HDR T2. My 8-year-old Panasonic 32″ very occasionally (every 3 months) went green screen but power cycling the Humax (sometimes just re-plugging the hdmi cable) ALWAYS solved the connection issue. I persevered with the Sony, moving the connection to the phono Red/White/Yellow set. I did notice that if you have an HDMI cable in as well, you will get a long message about legal issues popping up on the phono video link on switching from the HDMI green screen to AV. Given the mass of unsatisfied Humax & Panasonic customers with the latest kit, I’ll sit on my hands until better options present. My current fallback is a RaspberryPI3 + tuner + TVHeadend which worked well for the recent world rugby cup.
Hello, another newbie with the same green screen snags. HDR FOX T2/Sony Bravia TV.
This recurrent problem seems to be a bit of an elephant in the room for Humax and has persisted for many years, regardless of HDMI cables, switches, loader software and tv manufacturer.
The solutions are all temporary and the green screen handshake issue returns and increases in frequency, to the point of despair.
My ‘fixes’ usually involve completely powering-down the TV and Humax for increasingly lengthy periods of up to an hour or more, standing on one leg, facing East, having an argument with my wife about who turned it off, what sequence they used, who turned it on wrong, who turned it off incorrectly etc, etc.
Having checked the warranty, it doesn’t seem to include cover for divorce.
My guess is the green screen problem, as stated previously in this thread, is simply due to a hardware component degradation issue…hence the gradual deterioration and increasing frequency of the issue.
The ONLY solution inevitably revolves around upgrading your Humax, funny old thing. Or switching to an alternative brand.
Currently looking at the Humax FVP5000T in a bid to salvage my marriage for another couple of years.
If anyone is considering leaving their partner, I have a HDR Fox T2 (saves the hassle of an extra-marital affair). Ten quid, buyer collects.
Happy Christmas.
Ninja_Stoker – 2 hours ago »
My guess is the green screen problem, as stated previously in this thread, is simply due to a hardware component degradation issue…hence the gradual deterioration and increasing frequency of the issue.
I agree that component degradation is involved. The other parameter which you haven’t considered is the TV; this problem is far more common with certain brands of TV. Is the degrading component in the Humax or the TV?
Martin Liddle – 1 day ago »
Ninja_Stoker – 2 hours ago »
My guess is the green screen problem, as stated previously in this thread, is simply due to a hardware component degradation issue…hence the gradual deterioration and increasing frequency of the issue.
I agree that component degradation is involved. The other parameter which you haven’t considered is the TV; this problem is far more common with certain brands of TV. Is the degrading component in the Humax or the TV?
In my case the Humax was the problem.
Even though it worked OK initially on two different make TV’s, the green screen snag re-appeared and got worse over time.
My theory is that there are no moving parts in a TV & less heat generated because of it.
For many, the Humax is never de-energised and left in standby mode for recording purposes. Possibly they need better cooling or more sturdy components.
It’s a common theme to assume it’s the TV but a casual perusal on google reveals the common theme is Humax throughout.
I have 2 HDR-FOX-T2’s in daily use both feeding the same Tv (Sharp). One has never shown the ‘green screen’ effect, the other does occasionally. I’ve never been able to nail the exact reason for this, also it only ever happens on start up. If I re boot the TV and PVR the ‘green screen’ disappears, and so I have concluded that it might be an HDMI handshake problem.
fedman1 – 4 mins ago »
I have 2 HDR-FOX-T2’s in daily use both feeding the same Tv (Sharp). One has never shown the ‘green screen’ effect, the other does occasionally. I’ve never been able to nail the exact reason for this, also it only ever happens on start up. If I re boot the TV and PVR the ‘green screen’ disappears, and so I have concluded that it might be an HDMI handshake problem.
Pretty sure you are correct.
Assuming the HDMI handshake problem is eminating from the one Humax to the TV via the same switched HDMI lead, then clearly the signal is degraded (strong enough from one but not t’other)…unless the TV also displays green screen or ‘no signal’ when other periphals are fed in via a different HDMI port, such as DVD player, etc….in which case the TV, not the Humax is suspect.
I can eliminate the TV HDMI port and cable, when these are swapped the fault still occurs only on the one Humax. The serial number of the faulty machine shows it to be of earlier manufacture. Another possibility is timing of the ‘handshake’, for instance if booting has not reached a suitable point then I guess handshake will fail?
I have just upgraded my TV and am now suffering from the “Green Screen” problem. I have tried different HDMI cables, different port, V-Format, Audio type, HDMI splitter/switch. None of which makes any difference.
The green screen happens on about two-thirds of the start-ups. The best “fix” found so far is to pull out the HDMI cable and then re-plug – so far it appears to be a 100% workaround.
I have yet not tried a different boot loader. Can someone provide a download link to the alternative Bootloaders? I am using the latest custom firmware with a7.30 bootloader. I believe that this is quite an early one and would like to try a more recent version.
Prior to having the new TV I got an occasional green-screen flash but it always went on to work OK. Even with the new TV the Humax logo always appears, a black screen for a second or two and then green screen – or occasionally the program picture.
JefUK – 2 hours ago »
I have yet not tried a different boot loader. Can someone provide a download link to the alternative Bootloaders? I am using the latest custom firmware with a7.30 bootloader. I believe that this is quite an early one and would like to try a more recent version.
I am not convinced that changing the bootloader will make any difference (there were some early reports of success) but more recent attempts have not resolved the problem. I think I have a full set of the bootloaders. If you send me a PM I’ll send you a link to download them.
My T2 failed to negociate with a 2019 Sony. I believe the Sony fails to recognise the old protocol and marks it as an invalid source. I switched temporarily to the single yellow cable + 2 audio links. I’m now on a Vero4k front end + Raspberry Pi3 TVHeadend backend with 3 tuner capability using Kodi. The BBC Iplayer add-on for Kodi is so much quicker than the Sony junk processor. Another Hummy gathers dust.
I’ve had my HDR FOX T2 for 10 years. It has been a good and faithful servant, but I can’t find a solution to the “green screen” with a new Panasonic TV.
Because of this I purchased an Aura, but this has other issues of severe intermittent pixelation on COM7. It may be time to abandon Humax and try a Manhattan.
Unfortunately my Humax recently succumbed to the green screen of death, though to be fair it has given good service over many years. I was reluctant to let it go so I checked out the older video links and I discovered my TV had a SCART socket (which I had not realised previously). I searched out an old SCART cable I had not been able to bring myself to throw away and was able to use it to get a working link between my TV and the Humax. I checked the TV options for SCART input and set it to the higher quality RGB rather than the default CVSB. The resulting picture approximates to SD quality and is adequate for my needs. (The SCART signals are analogue so a quality cable should pay dividends. If your TV is without a SCART socket perhaps you can rig up a lower quality composite video link. Also, there are SCART to HDMI adapters available for around 15GBP so you might consider one of these a worthwhile investment. I have not tried this route so cannot recommend it but an adapter that supports RGB signals should be used for best results. I hope this helps.
- You must be logged in to reply to this topic.