Aura Beta software dated 22.03.21

Forum Forums Freeview HD Aura UHD Aura Beta software dated 22.03.21

Viewing 15 posts - 31 through 45 (of 73 total)
  • Author
    Posts
  • #104100
    Anonymous
    Inactive

    Failed to record second episode (12) of Master Chef tonight, not flagged in epg as a recording.had to manually record Not in schedule list, Friday’s listing has no information! Next monday’s episode (13) is listed. Looks like a BBC error.

    #104101
    Anonymous
    Inactive

    Following the last Beta update, the Aura seems to default to “HDMI auto” after the unit has been put into standby, forgetting the previous fixed setting (1080i in my case)

    #104102
    Barry
    Moderator

    andyd1302 – 2 hours ago  » 

    Following the last Beta update, the Aura seems to default to “HDMI auto” after the unit has been put into standby, forgetting the previous fixed setting (1080i in my case)

    Can you confirm which standby, active or deep (full) standby.

    Just tried to replicate putting unit into normal (active) standby – no issue, will check form deep in a moment, and also overnight.

    Edit: Long press deep standby, no change still set at 1080i, will leave as that and check tomorrow morning.

    #104103
    grahamlthompson
    Participant

    Mine is in full sby overnight. Output is set to 1080p50. Currently set to wake at 08:00. It has not changed from 1080p50.

    #104104
    Anonymous
    Inactive

    Casting Sky Cricket on Now TV to the Aura and the Aura has crashed after two and a half hours (earlier than usual as it usually manages 3-4 hours).

    #104105
    Anonymous
    Inactive

    grahamlthompson – 14 hours ago  » 

    GordyBoy – 6 hours ago  » 

    Not sure if this is an Aura problem or not. Last night at 10pm television and Aura were put into standby using the Aura remote. Remote was left on table next to TV and Aura.

    Went to bed about 12:30am this morning.

    Woke at about 2am this morning; the television, Aura and my FVP 4000t were all on. Only me and the wife in the house, both went to bed in the same room.

    Strange experience.

    Guessing this is a consequence of CEC power control. Hard to tell which item woke up and powered the others. Was the Aura put into long push sby ?

    Which kit has cec control turned on.

    LG TV. FVP 4000t not connected by CEC but was out of standby (blue LED)

    #104106
    Anonymous
    Inactive

    If I remember correctly I got a window up after pressing off button asking if I wanted to turn Aura off – I said yes. Is this deep standby?

    #104107
    Barry
    Moderator

    GordyBoy – 11 mins ago  » 

    If I remember correctly I got a window up after pressing off button asking if I wanted to turn Aura off – I said yes. Is this deep standby?

    Yes – Long press of standby button provides that option.

    #104108
    Anonymous
    Inactive

    Had one recording missed on Wednesday, a series linked House of Games which had been working fine as a series recording (and recorded fine yesterday too). At the moment putting it down as a one off, but will keep an eye out as the only thing that had changed was the new beta.

    #104109
    Anonymous
    Inactive

    Barry – 4 hours ago  » 

    andyd1302 – 2 hours ago  » 

    Following the last Beta update, the Aura seems to default to “HDMI auto” after the unit has been put into standby, forgetting the previous fixed setting (1080i in my case)

    Can you confirm which standby, active or deep (full) standby.

    Just tried to replicate putting unit into normal (active) standby – no issue, will check form deep in a moment, and also overnight.

    Edit: Long press deep standby, no change still set at 1080i, will leave as that and check tomorrow morning.

    Hi Barry,

    The box was in active standby & I’d just switched the unit on. The TV resolution displayed 1080p/50Hz & on checking the “Audio & Video” it was on “HDMI Auto”, but after checking it today after a deep standby it’s stayed on the 1080i setting, so hopefully just a one off but will continue to monitor just in case :-)

    #104110
    Anonymous
    Inactive

    Fixdit – 17 hours ago  » 

    Failed to record second episode (12) of Master Chef tonight, not flagged in epg as a recording.had to manually record Not in schedule list, Friday’s listing has no information! Next monday’s episode (13) is listed. Looks like a BBC error.

    Same for me too. I had the first recording, but not the second. Went back through the guide and watched it via iplayer instead.

    Looks like BBC had a shift around of programs. Eastenders and Master Chef were brought forward from Friday to Thursday night, to allow for Rugby on Friday night.

    #104111
    Anonymous
    Inactive

    Mars – 5 hours ago  » 

    Casting Sky Cricket on Now TV to the Aura and the Aura has crashed after two and a half hours (earlier than usual as it usually manages 3-4 hours).

    My wife and daughter have both informed me that have had similar when casting to the Aura from Youtube on mobile. The Aura just shuts off and they have to turn it back on again using the remote. I believe these were last weekend, so would have been on the previous version of the Beta. In both cases, they had only been casting for a short time (less than 30 minutes.)

    #104112
    Martin Liddle
    Participant

    MattB1 – 8 mins ago  » 

    Fixdit – 17 hours ago  » 

    Failed to record second episode (12) of Master Chef tonight, not flagged in epg as a recording.had to manually record Not in schedule list, Friday’s listing has no information! Next monday’s episode (13) is listed. Looks like a BBC error.

    Same for me too.

    On an FVP-5000T the second episode was not set to record in the guide on Thursday morning; I had to cancel the series and reschedule to get it to work properly. It did make successful recordings of both programmes.

    #104113
    Anonymous
    Inactive

    Mars – 6 hours ago  » 

    Casting Sky Cricket on Now TV to the Aura and the Aura has crashed after two and a half hours (earlier than usual as it usually manages 3-4 hours).

    Managed to cast the rest of the cricket ODI without a crash so almost 6 hours!

    #104114
    Anonymous
    Inactive

    andyd1302 – 11 hours ago  » 

    Following the last Beta update, the Aura seems to default to “HDMI auto” after the unit has been put into standby, forgetting the previous fixed setting (1080i in my case)

    Following timer recording after the unit woke up from active standby, “HDMI” setting changed back to “Auto” when box was switched back on & so box defaulted back to 1080p/50 rather than the previously set 1080i.

    Thought I’d imagined it the first time, but it definitely seems to be the case on my machine at least following the last Beta update.

Viewing 15 posts - 31 through 45 (of 73 total)
  • The topic ‘Aura Beta software dated 22.03.21’ is closed to new replies.

The inner genius!