Forum › Forums › Freesat HD › HDR 1000, 1010, 1100S › No icons
- This topic has 19 replies, 6 voices, and was last updated 11 years, 3 months ago by
Anonymous.
-
AuthorPosts
-
August 28, 2014 at 9:21 am #16003August 28, 2014 at 9:36 am #54392
grahamlthompson
ParticipantStill there on my box.
August 28, 2014 at 9:53 am #54393Anonymous
InactiveAny suggestions on how to fix this?
August 28, 2014 at 10:00 am #54394grahamlthompson
Participantgaryb – 6 minutes ago »
Any suggestions on how to fix this?
1 try removing the power in plug for about 15 minutes.
2 If that fails a reset to factory defaults hopefully will fix it.
August 28, 2014 at 10:11 am #54395Anonymous
InactiveBit of a strange one, looks like i will have to try a factory reset.
August 28, 2014 at 10:29 am #54396Anonymous
InactiveSeen this before, I think if network connections are ok they will populate (seems to be a periodic refresh, a power cycle seems to delay the refresh.
August 28, 2014 at 10:42 am #54397Anonymous
InactiveREPASSAC – 12 minutes ago »
Seen this before, I think if network connections are ok they will populate (seems to be a periodic refresh, a power cycle seems to delay the refresh.
Well a factory reset doesn’t work only noticed this a couple of weeks ago will just have to hope it goes back to normal at some stage.
August 28, 2014 at 10:48 am #54398grahamlthompson
Participantgaryb – 6 minutes ago »
REPASSAC – 12 minutes ago »
Seen this before, I think if network connections are ok they will populate (seems to be a periodic refresh, a power cycle seems to delay the refresh.
Well a factory reset doesn’t work only noticed this a couple of weeks ago will just have to hope it goes back to normal at some stage.
Does your on demand services work OK ?
August 28, 2014 at 12:48 pm #54399Anonymous
InactiveI have a dongle plugged into my box but it doesn’t work all that good so dont really use the ondemand as it either works or it doesn’t.
August 28, 2014 at 1:13 pm #54400grahamlthompson
Participantgaryb – 24 minutes ago »
I have a dongle plugged into my box but it doesn’t work all that good so dont really use the ondemand as it either works or it doesn’t.
That probably explains your missing icons.
August 28, 2014 at 1:16 pm #54401Anonymous
InactiveWhy would this cause missing icons?
August 28, 2014 at 1:29 pm #54402grahamlthompson
Participantgaryb – 12 minutes ago »
Why would this cause missing icons?
The data seems to delivered using the internet. Run a temporary cat 5 cable to your router to see if they come back.
August 28, 2014 at 2:33 pm #54403Anonymous
InactiveI thought as much i will give that a go to see if it sorts the problem.
thx
August 28, 2014 at 4:33 pm #54404Anonymous
Inactivegaryb – 1 hour ago »
I thought as much i will give that a go to see if it sorts the problem.
thx
I have the impression that the check for updates these is not run every day (at least on the HB-1000S, which uses a lot of the same logic.)
August 28, 2014 at 9:11 pm #54405Anonymous
Inactivegrahamlthompson – 7 hours ago »
garyb – 12 minutes ago »
Why would this cause missing icons?
The data seems to delivered using the internet. Run a temporary cat 5 cable to your router to see if they come back.
I beg to differ
, mine hasn’t been connected to the internet for well over a year and the icons are still there on showcase and the EPG, they also update on the EPG without any internet connection. The showcase programme pictures are delivered over the internet, so no internet no pics.
-
AuthorPosts
- You must be logged in to reply to this topic.

