- This topic has 166 replies, 15 voices, and was last updated 10 years, 3 months ago by
.
-
Posts
-
grahamlthompson – 52 minutes ago »
Djeckyll – 2 hours ago »
Cheers graham that sounds like the business never thought of the Scart converter. Will get it all on order and a couple of coax convertors for the Tri-link. Thanks
I screwed up (senior moment) , you need a triple RCA cable.
Yellow (CVBS aka Composite), Red – Right channel analogue audio, White – Left channel analogue audio.
Thanks for that
grahamlthompson – 4 days ago »
Djeckyll – 1 hour ago »
I have the new Humax HDR-1100S to replace Sky+ HD but it has no RF2 or Scart. It is located upstairs and the TV is wall mounted in room below and want to control it remotely like I did with Sky. I have a coax cable and HDMI running up stairs. What set up is recommended using the existing coax with a digi eye and I have been looking at a Triax Tri-link. I also want to send the signal to a second TV any assistance is much appreciated.
Hi welcome to our forum.
Either the Triax unit you mention or this one should do the job.
http://www.amazon.co.uk/Labgear-MRX700-DigiLink-SCART-Converter/dp/B00LFMVLNW
You will need a scart adaptor for the modulator end as the 1100S only has RCA sockets and a twin RCA phono cable.
eg
To feed two extra TV's you will need a sky compatible splitter or amplifier (capable of returning the magic eye remote control signals and passing 9V power.
eg
All working perfect
[attachment=39916,549]
- You must be logged in to reply to this topic.