Forum Replies Created
-
Posts
-
3 channels added:
Chan 150 – C4 Para 1 – 12304 H
Chan 151 – C4 Para 2 – 10921 H
Chan 152 – C4 Para 3 – 10921 H
No EPG data as yet
Edit: Recording works 😉
Obviously if you want to record opening ceremony then you will have to carry out a manual freesat tune.
Can’t say I recall anyone reporting such an issue before, and it will be late afternoon before I have recorded enough to try and replicate, but I will endeavour to check this one out on one of my units.
Your combination of issues is somewhat perplexing. Initially I thought HDD problem, and that may still be the case, but your problem with live viewing?
Is there any chance it is still in warranty?
Next step contact Humax support.
Unless one of our other guru’s has any input
Welcome to the Forum
Still in use attached to my HD T2, never filled it up though
See this thread also:
http://myhumax.org/forum/topic/hd-fox-t2-with-2tbyte-external-drive
Welcome to the Forum
Would appear that the buffer part of the HDD has become corrupted. Easiest fix is to re format HDD after you have watched all your recordings.
Welcome to the Forum
Can you confirm the software version on unit, latest is 1.00.26
I would start with a default settings, and then when tuning ensure you only have one transmitter tuned in see this post for help in that:
http://myhumax.org/forum/topic/week-old-9300t-and-epg-wont-fill-up-for-week#post-7097
You could also have a HDD problem, so a reformat might help as well.
Menu
Down
Down
Right
Down
Down
Down
Right
Left
OK
0000
If successful, unit should reboot to initial setup
Using scart you should be able to control the output volume of the 9300T using the Humax remote.
Same answer re TV volume there is not way to control this from the Humax remote.
Many use the harmony range, but I cannot comment as I use originals.
Welcome to the Forum
9200T and HDMI? Did you mean 9300T per chance, if so I’m afraid the volume control on the Humax remote is only a function of the scart output, not HDMI.
There is not way to control the TV volume using the Humax remote, have you considered a universal one such as the harmony range?
