Forum Replies Created
-
Posts
-
Welcome to our Forum
I only have access to the Humax dongle, and when I tested it previously it saved the settings, and connected automatically.
Will connect it up again for a few days and monitor.
Welcome to the Forum
Can’t say I have ever seen those symptoms reported before.
1. You do not have latest software uploaded which is 1.02.29
http://beta.humaxonline.co.uk/downloads/hdr-foxt2
and/or
2. You could try a factory reset, see if that improved matters.
I use this Link to product not cheap admittedly, but I needed more then one connection, in fact I have had to add a hub as well now ❗
Works very well.
There are far cheaper solutions then this though, a pair of 200Mbps adapters can be had for around the £25 mark now.
Update, someone I know in NI has confirmed problem with BBC 1HD and series links.
YV replied to my query re Food Network asking all sorts of questions bar my shoe size, why, heaven knows, surely simple enough for them to check!
The clock issue was only a front display issue not EPG timings.
Missed recordings Chan 5 were also reported on G1 units, however from my testing they appear to have corrected that problem today… we shall see as the week progresses, left the timers set for now (do not normally watch/record Chan 5 at all)
rodlaw – 46 minutes ago »
A real must if your clock is stuck on GMT+1. I did this and box have not missed a recording since.
Nope. All of the reports I have read the clock reset itself, and in anycase was only a front display issue, not EPG.
Welcome to the Forum
Factory default can be achieved via the following
Settings
System Settings
Factory Default
I presume it will work, but with the odd layout – no dedicated menu or recordings buttons for instance, not sure what the YV button will access.
Will have a go later, cannot do it now as in the middle of testing something on G2.
Have you tried the retune instructions as per the last time you had problems, as it appeared to fix it for you then:
