Forum Replies Created
-
Posts
-
Welcome to the Forum
Your guess of dish alignment sounds correct, the unit is probably not receiving the freesat home transponder.
It does work on the T1010 – I’ve tested it – not as straight forward as a T1000, but it does work, you have to use the front panel buttons.
Touch power on and as soon as central led turns on touch and keep touching vol – which is 9 o’clock on central control (led on 1010 is bluey/white not orange)
Once enter maintenance mode yes/no appears touch power again and wait.
When maintenance mode menu appears navigate the options touching the 12 or 6 positions on central control.
Welcome to the Forum
You could try updating from Maintenance mode see if that works. Follow the link from this page, substituting relevant buttons for T1010:
Link to above on Homebase website as it is listed under Set top boxes and not Digital recorders
:
Welcome to the Forum
Check out this FAQ see if it helps.
af123 – 17 minutes ago »
So is the red for standby just as bright as the red for on and recording? I expected the standby red to be noticeably dimmer!
There is a small difference in intensity that I can notice, whether others will be able to?
magic – 2 hours ago »
I’d be interested to know if the 2000t supports copying recordings (unencrypted) to external media like the hdr-fox does.
Welcome to the Forum
The present situation:
SD recordings can be copied off and played on PC, HD can be copied off but are encrypted and can only be played back via the same unit.
Welcome to the Forum
Find firmware versions via following
Foxsat HDR:
Menu
System
Diagnostics
Software Version…….
HDR 1000S:
Settings
System information
General info
Software version…….
